Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Dust Cover: with dust lip ; for components see parts list: ; Inner diameter [mm]: 120 mm ; Outer diameter [mm]: 140 mm ; Width [mm]: 13 mm ; Radial Shaft Seal Design: AW/BS ; Swirl Type: Left-hand Twist ; ArticleState: Normal ; Installation Information: Radialwellendichtringe mit PTFE-Dichtlippe trocken und ohne
Zusatz von Öl oder Fett montieren
Width [mm]: 21 mm ; Inner diameter [mm]: 115 mm ; Outer diameter [mm]: 120 mm ; Weight [kg]: 0.154 kg ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Fitting Position: Front Axle left and right ; Width [mm]: 13 mm ; Inner diameter [mm]: 120 mm ; Outer diameter [mm]: 140 mm ; Colour: Black ; Material: ACM (Polyacrylate) ; Material: PTFE (polytetrafluoroethylene) ; Fitting Position: Transmission End ; Weight [kg]: 0.097 kg ; ArticleState: Normal ; General Information: für Motorgehäuse
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Thickness [mm]: 12 mm ; Inner diameter [mm]: 100 mm ; Outer diameter [mm]: 130 mm ; Material: PTFE (polytetrafluoroethylene) ; Material: ACM (Polyacrylate) ; Supplementary Article/Supplementary Info: with sealing lip ; Fitting Position: Timing End ; Weight [kg]: 0.12 kg ; ArticleState: Normal ; General Information: mit Montagehilfe für Kurbelwelle und Steuerdeckel
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Thickness [mm]: 12 mm ; Inner diameter [mm]: 115 mm ; Outer diameter [mm]: 140 mm ; Material: ACM (Polyacrylate) ; Material: PTFE (polytetrafluoroethylene) ; Fitting Position: Timing End ; Weight [kg]: 0.12 kg ; ArticleState: Normal ; General Information: mit Montagehilfe für Kurbelwelle und Steuerdeckel
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Position / Degree: 1,2,3,4,5,6,7 º ; Component Number: 72-4527 ; Standard Size [STD]: ; ArticleState: Normal ; Technical Information: The following procedures must be carried out according to
the manufacturer's manual: 1) Drill two holes in the bearin
for the valve rocker's oil supply corresponding to the
position of the oil channels in the housing. 2) Drill one
dowel hole.
TecDoc Engine Number: MAN D 2676 LF 05 ; Version: MB7771CP0.25 ; Undersize [mm]: 0.25 mm ; ArticleState: Normal ; General Information: Material: trimetal
TecDoc Engine Number: MAN D 2676 LF 05 ; Version: MB1278CP ; Alternatively: ; Standard Size [STD]: ; ArticleState: Normal ; General Information: Material: trimetal
Oversize [mm]: 0.5 mm ; Component Number: 227HL21012050 ; for housing diameter from [mm]: 111 mm ; to housing diameter [mm]: 111.022 mm ; Width from [mm]: 36 mm ; for wall thickness from [mm]: 3.716 mm ; to wall thickness [mm]: 3.978 mm ; for shaft diamater from [mm]: 103.98 mm ; to shaft diameter [mm]: 104 mm ; ArticleState: Normal
Component Number: 227HL21012000 ; for housing diameter from [mm]: 111 mm ; to housing diameter [mm]: 111.022 mm ; Width from [mm]: 36 mm ; for wall thickness from [mm]: 3.466 mm ; to wall thickness [mm]: 3.478 mm ; for shaft diamater from [mm]: 103.98 mm ; to shaft diameter [mm]: 104 mm ; ArticleState: Normal
Component Number: 227AL20875000 ; for housing diameter from [mm]: 137.65 mm ; to housing diameter [mm]: 138 mm ; for wall thickness from [mm]: 3.35 mm ; to wall thickness [mm]: 3.4 mm ; for shaft diamater from [mm]: 114.4 mm ; to shaft diameter [mm]: 114.75 mm ; ArticleState: Normal
Oversize [mm]: 0.25 mm ; Component Number: 227HL21012025 ; for housing diameter from [mm]: 111 mm ; to housing diameter [mm]: 111.022 mm ; Width from [mm]: 36 mm ; for wall thickness from [mm]: 3.591 mm ; to wall thickness [mm]: 3.728 mm ; for shaft diamater from [mm]: 103.98 mm ; to shaft diameter [mm]: 104 mm ; ArticleState: Normal
Weight [kg]: 0.76 kg ; Inner diameter [mm]: 115 mm ; Outer diameter [mm]: 120 mm ; Height [mm]: 21 mm ; ArticleState: No longer supplied by manufacturer ; Technical Information: No Hardened
Suspension: for vehicles with standard chassis ; Spring Design: Coil spring with inconstant wire diameter ; Material: PTFE (polytetrafluoroethylene) ; Material: ACM (Polyacrylate) ; Supplementary Article/Info 2: with mounting sleeve ; Inner diameter [mm]: 120 mm ; Outer diameter [mm]: 140 mm ; Width [mm]: 12 mm ; Radial Shaft Seal Design: AB SL ; Swirl Type: Left-hand Twist ; ArticleState: Normal
Fitting Position: Wheel Side ; Fitting Position: Transmission End ; Position / Degree: 1,2,3,4,5,6,7 º ; Oversize [mm]: 0.5 mm ; ArticleState: Normal ; General Information: Glyco H1239/7 0.50MM
TecDoc Engine Number: MAN D 2676 LF 05 ; Fitting Position: Transmission End ; Thickness [mm]: 21 mm ; ArticleState: Normal ; General Information: Reinz 71-28368-00
for wall thickness from [mm]: 3.716 mm ; to wall thickness [mm]: 3.978 mm ; for shaft diamater from [mm]: 103.98 mm ; to shaft diameter [mm]: 104 mm ; for housing diameter from [mm]: 111 mm ; to housing diameter [mm]: 111.022 mm ; Oversize [mm]: 0.5 mm ; Width from [mm]: 36 mm ; ArticleState: Normal ; General Information: Mahle 227 HS 21013 050
for wall thickness from [mm]: 3.466 mm ; to wall thickness [mm]: 3.478 mm ; for shaft diamater from [mm]: 103.98 mm ; to shaft diameter [mm]: 104 mm ; for housing diameter from [mm]: 111 mm ; to housing diameter [mm]: 111.022 mm ; Width from [mm]: 36 mm ; ArticleState: Normal ; General Information: Mahle 227 HS 21013 000
Fitting Position: Transmission End ; Position / Degree: 1,2,3,4,5,6,7 º ; Oversize [mm]: 0.25 mm ; ArticleState: Normal ; General Information: Glyco H1239/7 0.25MM
for wall thickness from [mm]: 3.591 mm ; to wall thickness [mm]: 3.728 mm ; for shaft diamater from [mm]: 103.98 mm ; to shaft diameter [mm]: 104 mm ; for housing diameter from [mm]: 111 mm ; to housing diameter [mm]: 111.022 mm ; Oversize [mm]: 0.25 mm ; Width from [mm]: 36 mm ; ArticleState: Normal ; General Information: Mahle 227 HS 21013 025